The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
NFC 능동 및 수동 모드뿐만 아니라 13.56 MHz RFID 리더 및 태그 모드도 지원하는 듀얼 안테나 구조의 단일 칩 NFC 트랜시버를 설계 및 제작하였다. 제안된 NFC 트랜시버는 이니시에이터와 타겟의 이중 안테나 구조 덕분에 외부 전원 공급 없이도 RFID 태그로 작동할 수 있다. 개시 안테나의 차폐층을 이용하여 타겟 안테나를 구성하기 때문에 타겟 안테나 추가에 따른 면적 증가는 무시할 수 있다.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
부
Junghyun CHO, Jikon KIM, Shiho KIM, "An NFC Transceiver with Dual Antenna Structure to Support RF-Powered Transponder Mode" in IEICE TRANSACTIONS on Communications,
vol. E92-B, no. 1, pp. 310-313, January 2009, doi: 10.1587/transcom.E92.B.310.
Abstract: A single chip NFC transceiver with Dual Antenna structure supporting not only NFC active and passive mode but also 13.56 MHz RFID reader and tag mode is designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply thanks to a dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of the initiator antenna.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.E92.B.310/_p
부
@ARTICLE{e92-b_1_310,
author={Junghyun CHO, Jikon KIM, Shiho KIM, },
journal={IEICE TRANSACTIONS on Communications},
title={An NFC Transceiver with Dual Antenna Structure to Support RF-Powered Transponder Mode},
year={2009},
volume={E92-B},
number={1},
pages={310-313},
abstract={A single chip NFC transceiver with Dual Antenna structure supporting not only NFC active and passive mode but also 13.56 MHz RFID reader and tag mode is designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply thanks to a dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of the initiator antenna.},
keywords={},
doi={10.1587/transcom.E92.B.310},
ISSN={1745-1345},
month={January},}
부
TY - JOUR
TI - An NFC Transceiver with Dual Antenna Structure to Support RF-Powered Transponder Mode
T2 - IEICE TRANSACTIONS on Communications
SP - 310
EP - 313
AU - Junghyun CHO
AU - Jikon KIM
AU - Shiho KIM
PY - 2009
DO - 10.1587/transcom.E92.B.310
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E92-B
IS - 1
JA - IEICE TRANSACTIONS on Communications
Y1 - January 2009
AB - A single chip NFC transceiver with Dual Antenna structure supporting not only NFC active and passive mode but also 13.56 MHz RFID reader and tag mode is designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply thanks to a dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of the initiator antenna.
ER -