The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
저전압으로 대전된 금속 물체로 인한 정전기 방전(ESD) 현상은 첨단 정보 장비에 치명적인 전자기 간섭을 일으킵니다. 메커니즘을 설명하기 위해 6GHz 디지털 오실로스코프를 사용하여 이전에 대전된 인체에서 휴대용 금속 조각의 충돌로 인한 방전 전류를 측정하고 전류 계산 모델을 제공했습니다. 본 연구에서는 계산 모델을 바탕으로 측정된 방전 전류로부터 갭 전위 구배를 도출하는 방법을 제시하였다. 방전 전류 측정은 200V에서 1000V까지의 충전 전압에 대해 이루어졌습니다. 해당 전위 구배가 추정되었으며, 이는 다른 연구자의 실험 결과와 함께 파센의 법칙에 기초한 경험식과 비교하여 검증되었습니다.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
부
Yoshinori TAKA, Osamu FUJIWARA, "Estimation of Potential Gradient from Discharge Current through Hand-Held Metal Piece from Charged Human Body" in IEICE TRANSACTIONS on Communications,
vol. E93-B, no. 7, pp. 1797-1800, July 2010, doi: 10.1587/transcom.E93.B.1797.
Abstract: Electrostatic discharge (ESD) events due to metal objects electrified with low voltages give a fatal electromagnetic interference to high-tech information equipment. In order to elucidate the mechanism, with a 6-GHz digital oscilloscope, we previously measured the discharge current due to collision of a hand-held metal piece from a charged human body, and gave a current calculation model. In this study, based on the calculation model, a method was presented for deriving a gap potential gradient from the measured discharge current. Measurements of the discharge currents were made for charge voltages from 200 V to 1000 V. The corresponding potential gradients were estimated, which were validated in comparison with an empirical formula based on the Paschen's law together with other researcher's experimental results.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.E93.B.1797/_p
부
@ARTICLE{e93-b_7_1797,
author={Yoshinori TAKA, Osamu FUJIWARA, },
journal={IEICE TRANSACTIONS on Communications},
title={Estimation of Potential Gradient from Discharge Current through Hand-Held Metal Piece from Charged Human Body},
year={2010},
volume={E93-B},
number={7},
pages={1797-1800},
abstract={Electrostatic discharge (ESD) events due to metal objects electrified with low voltages give a fatal electromagnetic interference to high-tech information equipment. In order to elucidate the mechanism, with a 6-GHz digital oscilloscope, we previously measured the discharge current due to collision of a hand-held metal piece from a charged human body, and gave a current calculation model. In this study, based on the calculation model, a method was presented for deriving a gap potential gradient from the measured discharge current. Measurements of the discharge currents were made for charge voltages from 200 V to 1000 V. The corresponding potential gradients were estimated, which were validated in comparison with an empirical formula based on the Paschen's law together with other researcher's experimental results.},
keywords={},
doi={10.1587/transcom.E93.B.1797},
ISSN={1745-1345},
month={July},}
부
TY - JOUR
TI - Estimation of Potential Gradient from Discharge Current through Hand-Held Metal Piece from Charged Human Body
T2 - IEICE TRANSACTIONS on Communications
SP - 1797
EP - 1800
AU - Yoshinori TAKA
AU - Osamu FUJIWARA
PY - 2010
DO - 10.1587/transcom.E93.B.1797
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E93-B
IS - 7
JA - IEICE TRANSACTIONS on Communications
Y1 - July 2010
AB - Electrostatic discharge (ESD) events due to metal objects electrified with low voltages give a fatal electromagnetic interference to high-tech information equipment. In order to elucidate the mechanism, with a 6-GHz digital oscilloscope, we previously measured the discharge current due to collision of a hand-held metal piece from a charged human body, and gave a current calculation model. In this study, based on the calculation model, a method was presented for deriving a gap potential gradient from the measured discharge current. Measurements of the discharge currents were made for charge voltages from 200 V to 1000 V. The corresponding potential gradients were estimated, which were validated in comparison with an empirical formula based on the Paschen's law together with other researcher's experimental results.
ER -