The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
3포트 네트워크가 임의 임피던스에 의해 종료되는 경우 대칭 평면이 존재하지 않기 때문에 짝수 및/또는 홀수 모드 여기 분석을 위한 기존 방법을 사용할 수 없습니다. 이러한 조건에서 비대칭 3dB 분기선 하이브리드에 대한 두 가지 유형의 새로운 설계 방정식이 보고되었습니다. 도출된 설계 방정식이 정확하고 적응 가능한지 확인하기 위해 한 가지 유형의 비대칭 50dB 분기선 하이브리드와 41.6Ω, 55.6Ω, 62.5Ω 및 3Ω으로 종료되는 단일 평면 분기선 하이브리드에 대해 가정된 이상적인 조건에서 시뮬레이션을 수행했습니다. 다른 유형의 비대칭 XNUMXdB 분기선 하이브리드에 대해 XNUMXΩ을 제작하고 측정했습니다.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
부
Hee-Ran AHN, Ingo WOLFF, "3-dB Branch-Line Hybrids with Arbitrary Termination Impedance Values" in IEICE TRANSACTIONS on Electronics,
vol. E82-C, no. 7, pp. 1324-1326, July 1999, doi: .
Abstract: If a four-port network is terminated by arbitrary impedances, the conventional methods for even- and/or odd-mode excitation analyses are not available because no symmetry planes exist. Under these conditions, two types of new design equations for asymmetric 3-dB branch-line hybrids are reported. To make sure that the derived design equations are correct and adaptable, simulations were performed under assumed ideal conditions for one type of asymmetric 3-dB branch-line hybrid and a uniplanar branch-line hybrid terminated by 50 Ω, 41.6 Ω, 55.6 Ω and 62.5 Ω was fabricated and measured for another type of asymmetric 3-dB branch-line hybrid.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e82-c_7_1324/_p
부
@ARTICLE{e82-c_7_1324,
author={Hee-Ran AHN, Ingo WOLFF, },
journal={IEICE TRANSACTIONS on Electronics},
title={3-dB Branch-Line Hybrids with Arbitrary Termination Impedance Values},
year={1999},
volume={E82-C},
number={7},
pages={1324-1326},
abstract={If a four-port network is terminated by arbitrary impedances, the conventional methods for even- and/or odd-mode excitation analyses are not available because no symmetry planes exist. Under these conditions, two types of new design equations for asymmetric 3-dB branch-line hybrids are reported. To make sure that the derived design equations are correct and adaptable, simulations were performed under assumed ideal conditions for one type of asymmetric 3-dB branch-line hybrid and a uniplanar branch-line hybrid terminated by 50 Ω, 41.6 Ω, 55.6 Ω and 62.5 Ω was fabricated and measured for another type of asymmetric 3-dB branch-line hybrid.},
keywords={},
doi={},
ISSN={},
month={July},}
부
TY - JOUR
TI - 3-dB Branch-Line Hybrids with Arbitrary Termination Impedance Values
T2 - IEICE TRANSACTIONS on Electronics
SP - 1324
EP - 1326
AU - Hee-Ran AHN
AU - Ingo WOLFF
PY - 1999
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E82-C
IS - 7
JA - IEICE TRANSACTIONS on Electronics
Y1 - July 1999
AB - If a four-port network is terminated by arbitrary impedances, the conventional methods for even- and/or odd-mode excitation analyses are not available because no symmetry planes exist. Under these conditions, two types of new design equations for asymmetric 3-dB branch-line hybrids are reported. To make sure that the derived design equations are correct and adaptable, simulations were performed under assumed ideal conditions for one type of asymmetric 3-dB branch-line hybrid and a uniplanar branch-line hybrid terminated by 50 Ω, 41.6 Ω, 55.6 Ω and 62.5 Ω was fabricated and measured for another type of asymmetric 3-dB branch-line hybrid.
ER -