The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
우리는 사출 성형 공정을 통해 단일 모드 광섬유 커넥터용 플라스틱 페룰과 분할 정렬 슬리브를 성공적으로 제작했습니다. 페룰의 성형 재료로는 액정 폴리머(LCP)가 사용되었습니다. 페룰 금형에 편심 제어 메커니즘을 도입하여 편심 1μm 미만을 실현했습니다. 슬리브의 성형재료로는 열경화성 에폭시 수지를 사용하였다. 적절한 치수 설계와 성형 공정을 통해 적절한 기계적 특성을 구현했습니다. 이러한 플라스틱 구성 요소를 결합한 시스템의 광학적 특성은 단일 모드 SC 유형 커넥터와 호환되며 덥고 습한 조건에서도 안정적입니다.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
부
Hirotsugu SATO, Shuichi YANAGI, Yoshito SHUTO, Masayoshi OHNO, Shun-ichi TOHNO, "Injection Molded Fiber-Optic Connector Components for Single-Mode Fiber Applications" in IEICE TRANSACTIONS on Electronics,
vol. E82-C, no. 8, pp. 1578-1583, August 1999, doi: .
Abstract: We successfully fabricated plastic ferrules and split alignment sleeves for single-mode fiber-optic connectors by the injection molding process. Liquid crystalline polymer (LCP) was used as the molding material for the ferrule. We introduced an eccentricity control mechanism into the ferrule mold and realized an eccentricity of less than 1 µm. As the molding material for the sleeve, thermosetting epoxy resin was used. Suitable mechanical properties were realized by employing appropriate dimensional design and the molding process. The optical characteristics of a system combining these plastic components are compatible with single-mode SC-type connectors and are also stable under hot and humid conditions.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e82-c_8_1578/_p
부
@ARTICLE{e82-c_8_1578,
author={Hirotsugu SATO, Shuichi YANAGI, Yoshito SHUTO, Masayoshi OHNO, Shun-ichi TOHNO, },
journal={IEICE TRANSACTIONS on Electronics},
title={Injection Molded Fiber-Optic Connector Components for Single-Mode Fiber Applications},
year={1999},
volume={E82-C},
number={8},
pages={1578-1583},
abstract={We successfully fabricated plastic ferrules and split alignment sleeves for single-mode fiber-optic connectors by the injection molding process. Liquid crystalline polymer (LCP) was used as the molding material for the ferrule. We introduced an eccentricity control mechanism into the ferrule mold and realized an eccentricity of less than 1 µm. As the molding material for the sleeve, thermosetting epoxy resin was used. Suitable mechanical properties were realized by employing appropriate dimensional design and the molding process. The optical characteristics of a system combining these plastic components are compatible with single-mode SC-type connectors and are also stable under hot and humid conditions.},
keywords={},
doi={},
ISSN={},
month={August},}
부
TY - JOUR
TI - Injection Molded Fiber-Optic Connector Components for Single-Mode Fiber Applications
T2 - IEICE TRANSACTIONS on Electronics
SP - 1578
EP - 1583
AU - Hirotsugu SATO
AU - Shuichi YANAGI
AU - Yoshito SHUTO
AU - Masayoshi OHNO
AU - Shun-ichi TOHNO
PY - 1999
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E82-C
IS - 8
JA - IEICE TRANSACTIONS on Electronics
Y1 - August 1999
AB - We successfully fabricated plastic ferrules and split alignment sleeves for single-mode fiber-optic connectors by the injection molding process. Liquid crystalline polymer (LCP) was used as the molding material for the ferrule. We introduced an eccentricity control mechanism into the ferrule mold and realized an eccentricity of less than 1 µm. As the molding material for the sleeve, thermosetting epoxy resin was used. Suitable mechanical properties were realized by employing appropriate dimensional design and the molding process. The optical characteristics of a system combining these plastic components are compatible with single-mode SC-type connectors and are also stable under hot and humid conditions.
ER -