The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
금속-유전체-금속 플라즈몬 도파관으로 구성된 공진기를 갖춘 효율적인 굴곡 도파관과 광전력 분배기를 분석했습니다. 해결 방법은 PLRC(조각 선형 재귀 컨볼루션) 방법과 FD-TD(유한 차분 시간 영역) 방법입니다. 좁은 도파관과 입출력 도파관 사이의 연결에서 임피던스 불일치를 활용하여 공진기를 구현할 수 있습니다. 구부러진 도파관에 대한 수치 결과는 좁은 도파관의 길이를 조정하여 전송 대역을 제어할 수 있음을 보여줍니다. 또한 전력 분배기의 광 출력은 공진 파장의 출력 도파관에 완전히 분배되고 그 분배 비율이 제어될 수 있음을 보여주었습니다.
Yoshihiro NAKA
University of Miyazaki
Masahiko NISHIMOTO
Kumamoto University
Mitsuhiro YOKOTA
University of Miyazaki
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
부
Yoshihiro NAKA, Masahiko NISHIMOTO, Mitsuhiro YOKOTA, "Analysis of Optical Resonator Constructed by Two-Dimensional MDM Plasmonic Waveguide" in IEICE TRANSACTIONS on Electronics,
vol. E106-C, no. 3, pp. 103-106, March 2023, doi: 10.1587/transele.2022ECS6004.
Abstract: An efficient bent waveguide and an optical power splitter with a resonator constructed by a metal-dielectric-metal plasmonic waveguide have been analyzed. The method of solution is the finite difference time domain (FD-TD) method with the piecewise linear recursive convolution (PLRC) method. The resonator can be realized by utilizing impedance mismatch at the connection between a narrow waveguide and an input/output waveguide. Numerical results for the bent waveguide show that transmission bands can be controlled by adjusting the length of the narrow waveguide. We have also shown that the optical power of the power splitter is entirely distributed into the output waveguide at the resonant wavelength and its distribution ratio can be controlled.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.2022ECS6004/_p
부
@ARTICLE{e106-c_3_103,
author={Yoshihiro NAKA, Masahiko NISHIMOTO, Mitsuhiro YOKOTA, },
journal={IEICE TRANSACTIONS on Electronics},
title={Analysis of Optical Resonator Constructed by Two-Dimensional MDM Plasmonic Waveguide},
year={2023},
volume={E106-C},
number={3},
pages={103-106},
abstract={An efficient bent waveguide and an optical power splitter with a resonator constructed by a metal-dielectric-metal plasmonic waveguide have been analyzed. The method of solution is the finite difference time domain (FD-TD) method with the piecewise linear recursive convolution (PLRC) method. The resonator can be realized by utilizing impedance mismatch at the connection between a narrow waveguide and an input/output waveguide. Numerical results for the bent waveguide show that transmission bands can be controlled by adjusting the length of the narrow waveguide. We have also shown that the optical power of the power splitter is entirely distributed into the output waveguide at the resonant wavelength and its distribution ratio can be controlled.},
keywords={},
doi={10.1587/transele.2022ECS6004},
ISSN={1745-1353},
month={March},}
부
TY - JOUR
TI - Analysis of Optical Resonator Constructed by Two-Dimensional MDM Plasmonic Waveguide
T2 - IEICE TRANSACTIONS on Electronics
SP - 103
EP - 106
AU - Yoshihiro NAKA
AU - Masahiko NISHIMOTO
AU - Mitsuhiro YOKOTA
PY - 2023
DO - 10.1587/transele.2022ECS6004
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E106-C
IS - 3
JA - IEICE TRANSACTIONS on Electronics
Y1 - March 2023
AB - An efficient bent waveguide and an optical power splitter with a resonator constructed by a metal-dielectric-metal plasmonic waveguide have been analyzed. The method of solution is the finite difference time domain (FD-TD) method with the piecewise linear recursive convolution (PLRC) method. The resonator can be realized by utilizing impedance mismatch at the connection between a narrow waveguide and an input/output waveguide. Numerical results for the bent waveguide show that transmission bands can be controlled by adjusting the length of the narrow waveguide. We have also shown that the optical power of the power splitter is entirely distributed into the output waveguide at the resonant wavelength and its distribution ratio can be controlled.
ER -