The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
조회수
126
최근 마이크로파 고전력 전송을 위한 빔 융합 기술로 “양측 역방향 시스템”이 제안되었습니다. 실험을 통해 양면 역방향 지시 시스템의 유효성을 입증하기 위해 저자는 2차원 측정 장비를 제안합니다. 평행판 도파관의 전파를 자유 공간 전파에 기초하여 유추하고, 시뮬레이션을 통해 이론과 특성을 명확히 했습니다. 도파관의 전기장 분포는 제안된 장비를 사용하여 전기 프로브를 통해 측정되었습니다. 두 가지 유형의 측정 장비가 개발되었습니다. 하나는 원리 검증을 위한 소규모 장치인 4요소 실험 시스템이다. 다른 하나는 16요소 측정 장비로, 다음 단계에서 양면 역방향 지향 시스템의 빔 수렴을 평가하기 위한 것입니다. 측정된 결과를 시뮬레이션 결과와 비교하였습니다. 그 결과, 도파관에 형성된 빔이 성공적으로 측정되었음을 확인하였다. 이로써 빔 수렴성 평가를 위한 2차원 측정 장비의 유효성이 나타났다.
Kazuki YUKAWA
Ryukoku University
Takayuki MATSUMURO
ATR
Toshio ISHIZAKI
Ryukoku University
Yohei ISHIKAWA
Kaiyo Inverse Dam Society
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
부
Kazuki YUKAWA, Takayuki MATSUMURO, Toshio ISHIZAKI, Yohei ISHIKAWA, "A Study on Evaluation Method for Beam Profile of Phased Array by Using Two-Dimensional Measurement Equipment" in IEICE TRANSACTIONS on Electronics,
vol. E106-C, no. 11, pp. 643-650, November 2023, doi: 10.1587/transele.2023MMI0004.
Abstract: Recently, “Both-Side Retrodirective System” was proposed, as a beam convergence technique, for microwave high power transmission. To demonstrate the effectiveness of the both-side retrodirective system by experiment, the authors propose a 2-dimensional measurement equipment. Propagation in the parallel plate waveguide was analogized based on free-space propagation, and the theory and characteristics were clarified by simulation. The electric field distribution in the waveguide was measured by electric probe with the proposed equipment. Two types of measurement equipment were developed. One is a 4-element experiment system, which is a small-scale device for principle verification. The other is a 16-element measurement equipment, which is intended to evaluate beam convergence of a both-side retrodirective system in the next step. The measured results were compared with simulation results. As a result, it was confirmed that the beam formed in the waveguide was successfully measured. Thus, the effectiveness of 2-dimensional measurement equipment for evaluation of beam convergence was shown.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.2023MMI0004/_p
부
@ARTICLE{e106-c_11_643,
author={Kazuki YUKAWA, Takayuki MATSUMURO, Toshio ISHIZAKI, Yohei ISHIKAWA, },
journal={IEICE TRANSACTIONS on Electronics},
title={A Study on Evaluation Method for Beam Profile of Phased Array by Using Two-Dimensional Measurement Equipment},
year={2023},
volume={E106-C},
number={11},
pages={643-650},
abstract={Recently, “Both-Side Retrodirective System” was proposed, as a beam convergence technique, for microwave high power transmission. To demonstrate the effectiveness of the both-side retrodirective system by experiment, the authors propose a 2-dimensional measurement equipment. Propagation in the parallel plate waveguide was analogized based on free-space propagation, and the theory and characteristics were clarified by simulation. The electric field distribution in the waveguide was measured by electric probe with the proposed equipment. Two types of measurement equipment were developed. One is a 4-element experiment system, which is a small-scale device for principle verification. The other is a 16-element measurement equipment, which is intended to evaluate beam convergence of a both-side retrodirective system in the next step. The measured results were compared with simulation results. As a result, it was confirmed that the beam formed in the waveguide was successfully measured. Thus, the effectiveness of 2-dimensional measurement equipment for evaluation of beam convergence was shown.},
keywords={},
doi={10.1587/transele.2023MMI0004},
ISSN={1745-1353},
month={November},}
부
TY - JOUR
TI - A Study on Evaluation Method for Beam Profile of Phased Array by Using Two-Dimensional Measurement Equipment
T2 - IEICE TRANSACTIONS on Electronics
SP - 643
EP - 650
AU - Kazuki YUKAWA
AU - Takayuki MATSUMURO
AU - Toshio ISHIZAKI
AU - Yohei ISHIKAWA
PY - 2023
DO - 10.1587/transele.2023MMI0004
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E106-C
IS - 11
JA - IEICE TRANSACTIONS on Electronics
Y1 - November 2023
AB - Recently, “Both-Side Retrodirective System” was proposed, as a beam convergence technique, for microwave high power transmission. To demonstrate the effectiveness of the both-side retrodirective system by experiment, the authors propose a 2-dimensional measurement equipment. Propagation in the parallel plate waveguide was analogized based on free-space propagation, and the theory and characteristics were clarified by simulation. The electric field distribution in the waveguide was measured by electric probe with the proposed equipment. Two types of measurement equipment were developed. One is a 4-element experiment system, which is a small-scale device for principle verification. The other is a 16-element measurement equipment, which is intended to evaluate beam convergence of a both-side retrodirective system in the next step. The measured results were compared with simulation results. As a result, it was confirmed that the beam formed in the waveguide was successfully measured. Thus, the effectiveness of 2-dimensional measurement equipment for evaluation of beam convergence was shown.
ER -