The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
저자들은 폴리머 액츄에이터를 사용하여 유연하고 인쇄 가능한 새로운 유형의 12GHz 대역 위상 변환기를 처음으로 제안했습니다. 폴리머 벤딩 액츄에이터는 인가된 바이어스 전압에 의해 마이크로파 신호용 도파관의 전기적 길이를 제어하는 위상 변이 제어 장치로서 반사형 3dB, 90° 하이브리드 커플러의 종단 장치로 사용되었습니다. 장치의 마이크로스트립 라인 회로는 저가형 스크린 인쇄 방식을 사용하여 제작되었습니다. 이온성 액체 전해질층과 두 개의 전도성 네트워크 복합층이 샌드위치된 2층 적층 구조의 폴리머 벤딩 액츄에이터를 습식 공정으로 형성하였다. 저자는 삽입 손실이 7dB인 액추에이터에 대해 2.73~XNUMXV의 낮은 구동 전압으로 위상 변이를 아날로그로 제어할 수 있음을 확인했습니다. 이 위상 시프터는 유연한 패치 안테나 및 트랜지스터와 같은 현재의 유연한 고분자 전자 장치와 통합될 수 있습니다.
Fumio SATO
Yamagata University
Michio YOKOYAMA
Yamagata University
Yudai USAMI
Yamagata University
Kentaro YAZAWA
Yamagata University
Takao KUKI
Kokushikan University
Shizuo TOKITO
Yamagata University
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
부
Fumio SATO, Michio YOKOYAMA, Yudai USAMI, Kentaro YAZAWA, Takao KUKI, Shizuo TOKITO, "Flexible and Printable Phase Shifter with Polymer Actuator for 12-GHz Band" in IEICE TRANSACTIONS on Electronics,
vol. E101-C, no. 10, pp. 767-774, October 2018, doi: 10.1587/transele.E101.C.767.
Abstract: The authors have proposed a new type of flexible and printable 12GHz-band phase shifter using polymer actuator for the first time. Polymer bending actuator was used as a termination device of a reflection-type 3-dB, 90° hybrid coupler as the phase-shift control unit which controls the electrical length of the waveguide for microwave signals by the applied bias voltage. The microstrip line circuit of the device has been fabricated using low-cost screen printing method. Polymer bending actuator having three-layer stacking structure, in which an ionic liquid electrolyte layer is sandwiched with two conductive network composite layers, was formed by wet processes. The authors have confirmed that the phase shift could be controlled in analog by low driving voltages of 2-7 V for the actuator with a insertion loss of 2.73 dB. This phase shifter can be integrated with flexible patch antenna and the current flexible polymer electronics devices such as transistors.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.E101.C.767/_p
부
@ARTICLE{e101-c_10_767,
author={Fumio SATO, Michio YOKOYAMA, Yudai USAMI, Kentaro YAZAWA, Takao KUKI, Shizuo TOKITO, },
journal={IEICE TRANSACTIONS on Electronics},
title={Flexible and Printable Phase Shifter with Polymer Actuator for 12-GHz Band},
year={2018},
volume={E101-C},
number={10},
pages={767-774},
abstract={The authors have proposed a new type of flexible and printable 12GHz-band phase shifter using polymer actuator for the first time. Polymer bending actuator was used as a termination device of a reflection-type 3-dB, 90° hybrid coupler as the phase-shift control unit which controls the electrical length of the waveguide for microwave signals by the applied bias voltage. The microstrip line circuit of the device has been fabricated using low-cost screen printing method. Polymer bending actuator having three-layer stacking structure, in which an ionic liquid electrolyte layer is sandwiched with two conductive network composite layers, was formed by wet processes. The authors have confirmed that the phase shift could be controlled in analog by low driving voltages of 2-7 V for the actuator with a insertion loss of 2.73 dB. This phase shifter can be integrated with flexible patch antenna and the current flexible polymer electronics devices such as transistors.},
keywords={},
doi={10.1587/transele.E101.C.767},
ISSN={1745-1353},
month={October},}
부
TY - JOUR
TI - Flexible and Printable Phase Shifter with Polymer Actuator for 12-GHz Band
T2 - IEICE TRANSACTIONS on Electronics
SP - 767
EP - 774
AU - Fumio SATO
AU - Michio YOKOYAMA
AU - Yudai USAMI
AU - Kentaro YAZAWA
AU - Takao KUKI
AU - Shizuo TOKITO
PY - 2018
DO - 10.1587/transele.E101.C.767
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E101-C
IS - 10
JA - IEICE TRANSACTIONS on Electronics
Y1 - October 2018
AB - The authors have proposed a new type of flexible and printable 12GHz-band phase shifter using polymer actuator for the first time. Polymer bending actuator was used as a termination device of a reflection-type 3-dB, 90° hybrid coupler as the phase-shift control unit which controls the electrical length of the waveguide for microwave signals by the applied bias voltage. The microstrip line circuit of the device has been fabricated using low-cost screen printing method. Polymer bending actuator having three-layer stacking structure, in which an ionic liquid electrolyte layer is sandwiched with two conductive network composite layers, was formed by wet processes. The authors have confirmed that the phase shift could be controlled in analog by low driving voltages of 2-7 V for the actuator with a insertion loss of 2.73 dB. This phase shifter can be integrated with flexible patch antenna and the current flexible polymer electronics devices such as transistors.
ER -