The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
저항과 동등하게 사용할 수 있는 CMOS 회로를 제안합니다. 이 회로는 다이오드 연결 MOSFET이 있는 간단한 차동 쌍을 사용하고 MOSFET의 임계값 이하 영역에서 구동될 때 고저항 저항기로 작동합니다. 차동 쌍의 테일 전류를 조정하여 저항을 1~1000MΩ 범위에서 제어할 수 있습니다. 0.35μm 2P-4M CMOS 공정 기술을 사용한 장치 제작 결과가 설명되어 있습니다. 저항은 13nA의 테일 전류에 대해 10MΩ, 135nA에 대해 1MΩ이었습니다. 칩 면적은 105μm
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
부
Shin'ichi ASAI, Ken UENO, Tetsuya ASAI, Yoshihito AMEMIYA, "High-Resistance Resistor Consisting of a Subthreshold CMOS Differential Pair" in IEICE TRANSACTIONS on Electronics,
vol. E93-C, no. 6, pp. 741-746, June 2010, doi: 10.1587/transele.E93.C.741.
Abstract: We propose a CMOS circuit that can be used as an equivalent to resistors. This circuit uses a simple differential pair with diode-connected MOSFETs and operates as a high-resistance resistor when driven in the subthreshold region of MOSFETs. Its resistance can be controlled in a range of 1-1000 MΩ by adjusting a tail current for the differential pair. The results of device fabrication with a 0.35-µm 2P-4M CMOS process technology is described. The resistance was 13 MΩ for a tail current of 10 nA and 135 MΩ for 1 nA. The chip area was 105 µm
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.E93.C.741/_p
부
@ARTICLE{e93-c_6_741,
author={Shin'ichi ASAI, Ken UENO, Tetsuya ASAI, Yoshihito AMEMIYA, },
journal={IEICE TRANSACTIONS on Electronics},
title={High-Resistance Resistor Consisting of a Subthreshold CMOS Differential Pair},
year={2010},
volume={E93-C},
number={6},
pages={741-746},
abstract={We propose a CMOS circuit that can be used as an equivalent to resistors. This circuit uses a simple differential pair with diode-connected MOSFETs and operates as a high-resistance resistor when driven in the subthreshold region of MOSFETs. Its resistance can be controlled in a range of 1-1000 MΩ by adjusting a tail current for the differential pair. The results of device fabrication with a 0.35-µm 2P-4M CMOS process technology is described. The resistance was 13 MΩ for a tail current of 10 nA and 135 MΩ for 1 nA. The chip area was 105 µm
keywords={},
doi={10.1587/transele.E93.C.741},
ISSN={1745-1353},
month={June},}
부
TY - JOUR
TI - High-Resistance Resistor Consisting of a Subthreshold CMOS Differential Pair
T2 - IEICE TRANSACTIONS on Electronics
SP - 741
EP - 746
AU - Shin'ichi ASAI
AU - Ken UENO
AU - Tetsuya ASAI
AU - Yoshihito AMEMIYA
PY - 2010
DO - 10.1587/transele.E93.C.741
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E93-C
IS - 6
JA - IEICE TRANSACTIONS on Electronics
Y1 - June 2010
AB - We propose a CMOS circuit that can be used as an equivalent to resistors. This circuit uses a simple differential pair with diode-connected MOSFETs and operates as a high-resistance resistor when driven in the subthreshold region of MOSFETs. Its resistance can be controlled in a range of 1-1000 MΩ by adjusting a tail current for the differential pair. The results of device fabrication with a 0.35-µm 2P-4M CMOS process technology is described. The resistance was 13 MΩ for a tail current of 10 nA and 135 MΩ for 1 nA. The chip area was 105 µm
ER -